Have you tried turning it off and on again?

This simple advice is tried, tested, and true: your problem might go away if you turn it off and on again.

If something doesn't seem right with your appliance, turn it off or unplug it for a while and let it rest. Plug it back in and see if that fixed the problem.

Who knows, it may just fix everything!

DIY Troubleshooting

There are many things on appliances that you might be able to fix yourself. The trick is to know what you need to fix. Luckily, that could be an easy fix.

Find out the make and model of your appliance. Once you have that, look up the owner's manual for it. There is almost certainly a section on troubleshooting in the manual.

Follow the steps to determine the error code, and look up the problem online. If its a bit more complicated than you'd like to handle, just give us a call and we can work with you on fixing your appliance!

Fix the Move

Out of all the things on appliances, the things that are most likely to break are the things that move.

On most appliances, this means you should look at your fans and motors if something has gone wrong.

Some of these are a quick fix and you can do yourself. Others are rather labor intensive and difficult, and you should give us a call if you run into those problems!

50% rule

Appliance repair can get very costly, often going into the hundreds of dollars. Is it worth keeping an appliance that is so costly to repair?

A good rule of thumb is the 50% rule.

The 50% rule is simple: If your appliance is 50% through its life or repairs will cost 50% of what its worth, its a better idea to get a new appliance.

We are open to buying your broken appliances to use as parts and sell you a new one!

The Dollar Test

Refrigerators work hard, and often they work harder than they have to. The seals on fridges often wears out, leaving the cold air the ability to escape.

A good test to see if you need to replace this seal is the dollar test.

The test is simple: take a dollar and close your fridge on it half way in the fridge. If it stays, the seal is fine. If it slips, you need to replace the seal.

a good seal lowers energy bills and keeps your food chilled and ready to eat!

When was the last time you replaced your water filter?

Your tap water can have more than just water in it. It may have herbicides, pesticides, heavy metals, benzene, and a bad taste to it.

Luckily, there's a very simple method to getting all of this out: Change your water filter. Your water filter needs to be changed every 3-6 months to ensure that it's filtering properly.

When was the last time you changed yours? Is it time?

Condenser Coils

Condenser coils are the coils in the back of the fridge or freezer that cool and condense the refrigerants, which keep your food cool.

When these coils gather dust on them, these coils have to work even harder to remove heat, which means they need to work even harder.

You should clean these coils at least twice a year. Why not clean them this weekend?

Summer is in full swing!

Summer is here and it feels so good!

If you're reaching into the freezer to enjoy a popsicle, you may see a lot of ice building up in there.

This ice prevents your appliance from running as well as it could, and this makes it use up more electricity.

To correct this, take all of the food out of the freezer and put it into a cooler on ice. Unplug your freezer and leave it open. Let all of the ice dethaw. Once it has, wipe up excess water. Then sanitize it all down before you plug it back in.

Enjoy your otter pops this summer!

Is your fridge not cooling properly?

If your fridge isn't cooling very well, the problem easily could be the condenser coils.

The fix is a  really easy one. First you locate where your coils are. They are likely under or behind the fridge. Make sure you can easily access them wherever they are. After that unplug the fridge, so that you don't accidentally shock yourself. Use your coil brush to wiggle lose any dirt, dust, hair, or other particles, and vaccuum up anything else that remains.

If you have any other questions or concerns, feel free to give us a call!

#1 thing to remember with all appliances

Preventative care is always better than corrective care. This means that upkeeping your appliances, such as keeping them clean, is much less expensive than having to replace a part or all of it.

We are dedicated to help you know your options with both needs. We run this blog to help give you preventative tips, and also run our business to help you get your appliances working like they need to.

Give us a call or stop in today if you're in need of help!

Things to do before the repairman arrives

There are a few things that you should keep in mind before the repairman arrives at your house to fix your appliance. It will make life easier for both you and for the repairman.

Time
We tend to be pretty good about our appointments, but sometimes things run over or under time. Its a good idea to have some extra time before and after the appointment set aside in case this happens.

Know what's wrong
Be able to communicate how your appliance isn't working, and how it may be on the fritz. If you have the make and model of the appliance before you call us, we can be even more prepared.

Watch where you're going!
We might need to get some equipment in and out, and maybe even the appliance. Make sure there is a cleared path for us to get around.

Down, boy!
Make sure your animals are put away. it is safer for you, us, and them. We want to make sure there aren't any accidents!

Payments
Its a good idea to ask how much repairs might cost. If you ask us before hand, we would be happy to give you an estimate.

The 50% Rule

Your washer has broken down, do you repair it or get a new one? It can be a tough decision, but there's a rule of thumb that may help.

"The 50% Rule" states that if your appliance is 50% through it's life span, and the cost of repairing it would be equal to 50% of buying a new appliance, you should probably just buy a new one.

Luckily we have a wide selection of appliances at our stores if you are in need of a new one! Stop on down to check them out today!

The Miracle Cleaner

So many cleaners have very harsh chemicals. Some that even encourage you to wear a mask, have flowing air, or take very frequent breaks from using it. There is one that cleaner that we always recommend that has none of the negative side effects: white vinegar.

The thing that makes vinegar such a good cleaner is the acetic acid. It helps clean away dirt, grime, and germs.

Its safe to clean your washer, dryer, fridge, oven, freezer, microwave, or just about anywhere else. If you're into green and safe chemicals, it the perfect option to switch to.

Why Impulse Buy?

Salesmen at a big-box shop can be intimidating with their pushiness. They want to sell you the latest and greatest so they get their commission. They will practically try to sell you a washer and dryer that tweet out when your laundry is done. No one needs all those bells and whistles - just clean clothes.

We sell the tried and true products, and with great perks. We have a lifetime service guarantee and have a 90-day financing cash option! We also wont push you to close a sale.

If you're in need of a new large appliance or just a repair, give us a call or stop on by.

Here are Some Tips to Optimize Your Kitchen Appliances

Dishwasher Tips

If the dishes are not getting clean...

1. Make sure the water is hot, preferably at least 140 degrees. Note that this is hot enough to burn you!

2. Make sure the lower spray arm turns freely.

3. Clear out any debris from the bottom inside the dishwasher.

Stove Tips

If your burners are not heating...

1. Make sure they are sitting straight in their proper positions.

2. Make sure the clock is set on manual cycle and not the automatic time bake cycle.

3. Wipe off the burner with a hot, damp rag and then dry completely.

4. Make sure the clock is set on the manual and not the automatic cycle.

5. Raise up the top and keep the area clean and free of grease build-up.

Refrigerator Tips

If your refrigerator is not running or is not cold enough...

1. Turn the thermostat up to the next highest setting. If it comes on, let it run for 24 hours and check temperature to confirm it is working properly.

2. Clear and/or remove anything blocking the air flow around the outside of the refrigerator (on top, underneath, behind, beside, in front of, etc.). Allow 3" of clearance all the way around.

Everything Is Defrosting, So Should Your Freezer!

Its starting to warm up, the sun is coming out more, and you may have even seen some squirrels running around.

While everything is coming out of the big freeze, it might be a good idea for your freezer to do the same.

Take everything out of your freezer and into a cooler, unplug it, and leave the door open. Let it completely defrost. When the entire freezer is room temperature, sanitize it.

Finally, you can put everything back in and enjoy a more functional freezer!

Don't forget to wash behind your gaskets!

Dust, mold, mildew, and food particles can get stuck in your fridge's gaskets. Your gaskets help keep the cold air in, and if something is preventing a clean seal, it'll make your fridge not work as well.

This is an incredibly easy fix though. All you have to do is get a damp towel or wipe and clean it out!

Is your freezer squealing like a pig?

There could be a couple of things that this is, but one of the most likely things is your freezer fan motor has gone out. This is a bit trickier to do yourself, so give us a call and we'll help you fix it in no time!

Odd Tasting Water

Is your water or ice tasting or smelling odd? Chances are that you need to replace your water filter. Ideally, water filters should be changed every 6 months or so. Usually replacing them is easy enough to where you can do it on your own at home. Just look up the manufacturer’s instructions on how to do it.

Tips to make your repair go quicker

There are a couple of things that can make our job helping you a lot easier. Let's go over them!

Brand

Knowing which brand your appliance is helps us narrow down what the problem may be, and how we can correct it. Certain brands operate in certain ways, and if we know which one it is, it makes it that much easier for us to fix it!

Model

Knowing the model further narrows down what the problem may be. Like with brands, certain models tend to wear out in very specific ways.